Publicidad
Enlaces rápidos
Figure 1
CLOCK SET UP INSTRUCTIONS
1. Move the clock close to its final location. Levelers are provided on the bottom of the clock (Figure 2).
IMPORTANT: ENSURE CLOCK IS POSITIONED SQUARE AND FIRM ON THE FLOOR SO THAT IT WILL NOT
FALL OVER. ADJUST LEVELERS FOR MAXIMUM STABILITY AND PROPER ALIGNMENT.
2. Access the clock movement by removing the back panel (Figure 1).
3. Install one "AA" size alkaline battery according to the +/- symbols in the battery holder (Figure 3).
4. Turn the Time Setting Dial to rotate the hands to the correct time (Figure 3).
5. Close the access panel (Figure 1).
IMPORTANT: KEEP PLASTIC BAGS AND SMALL PARTS AWAY FROM CHILDREN.
BATTERY REPLACEMENT
If the clock begins to lose time, this is a sign of a weak or exhausted batteries. Replace with new
alkaline batteries.
615102 FLOOR CLOCK
SET UP AND OPERATING INSTRUCTIONS
Leveler
Figure 2
Time Setting Dial
+
Figure 3
-
2321442
07/2017
Publicidad
Manuales relacionados para Howard Miller 615102
Resumen de contenidos para Howard Miller 615102
- Página 1 615102 FLOOR CLOCK SET UP AND OPERATING INSTRUCTIONS Leveler Figure 2 Time Setting Dial Figure 1 Figure 3 CLOCK SET UP INSTRUCTIONS 1. Move the clock close to its final location. Levelers are provided on the bottom of the clock (Figure 2).
- Página 2 615102 FLOOR CLOCK SETUP AND OPERATING INSTRUCTIONS INSTRUCCIONES DE CONFIGURACIÓN DEL RELOJ 1. Mueva el reloj cerca de su ubicación final. Los niveladores se proporcionan en la parte inferior del reloj (Figura 2). IMPORTANTE: ASEGÚRESE DE QUE EL RELOJ ESTÁ POSICIONADO CUADRADO Y FIRMADO EN EL SUELO PARA QUE NO SE CAERSE.