Publicidad
Idiomas disponibles
Idiomas disponibles
TEFEN
TEFEN Advanced Plastic Solutions.
To assemble the stand – Push the bushing (2) onto the open
end of the leg (1). Insert the arch brace into the leg,
swivel from side to side until completely inside.
Repeat with the other legs.
Attach the arched brace to the body of the injector (4)
with 8 mm bolt (5) and tighten the nut (6).
Repeat with the other arched brace.
Connection of the suction tube
Insert the flat seal into the nut of the coupling on the end of the tube (1). Thread and tighten the
nut to the inlet valve on the bottom of the injector. Make sure that the nut is threaded and tighten
properly (2,3).
3
Publicidad
