Publicidad
Idiomas disponibles
Idiomas disponibles
Part 9
OPERATING YOUR DRYER
3 3
Custom Program
Set up your favorite
combination of settings and
save them here for one-touch
recall.
1. Select a cycle.
2. Change DRY LEVEL and TEMP. CONTROL.
3. Select OPTIONS you want.
4. Press and hold the CUSTOM PROGRAM.
To recall your stored CUSTOM PROGRAM
Press CUSTOM PROGRAM button, then press
START/PAUSE.
4 4
Time Change Button
• Press MORE TIME or LESS
TIME until the desired drying
time is set.
Note
Time change button is available only with Manual
Dry, Time Dry and Rack Dry programs.
2 8
5 5
LED Display
1. CHECK FILTER REMINDER
The display will show CHECK FILTER when the
dryer is turned on as a reminder to check the filter.
It turns off when the START/PAUSE button is pressed.
WARNING!
• For better drying performance and safety, clean
lint filter every single use.
• Failure to follow these instructions can result in
death or fire.
2. Estimated Time Remaining
The display shows the estimated time remaining.
In addition to this, if the dryer has some problem, it
displays error messages.
3. CYCLE COMPLETION INDICATOR
Shows how much of the current drying cycle has been
completed.
4. STATUS/CYCLE DISPLAY
This portion of the display shows the selected cycle,
operating status, and special messages. If a cycle has
special instructions, they will also be displayed in this
area.
Publicidad
