Wall Mounting Bracket
(Depending upon model)
Make sure to use screws and wall mounts that meet the VESA standard.
Standard dimensions for the wall mount kits are described in the
following table.
B
43UN71*
50UN72*
Model
43/50UN73*
50UN80*
VESA (A x B) (mm)
200 x 200
M6
Standard screw
Number of screws
4
Wall mount bracket
LSW240B
(optional)
MSW240
65UN71*
Model
60/65UN73*
65UN80*
VESA (A x B) (mm)
300 x 300
Standard screw
M6
Number of screws
4
Wall mount bracket
OLW480B
(optional)
6
A
49/55UN71*
55UN72*
49/55UN73*
55UN80*
300 x 300
M6
4
OLW480B
MSW240
70/75UN71*
70UN73*
75/82/86UN80*
600 x 400
M8
4
LSW640B
Lifting and moving the TV
When moving or lifting the TV, read the following to prevent the TV
from being scratched or damaged and for safe transportation regardless
of its type and size.
• It is recommended to move the TV in the box or packing material
that the TV originally came in.
• Before moving or lifting the TV, disconnect the power cord and
all cables.
• When holding the TV, the screen should face away from you to
avoid damage.
• Hold the top and bottom of the TV frame firmly. Make sure not to
hold the transparent part, speaker, or speaker grille area.
• Use at least two people to move a large TV.
• When transporting the TV by hand, hold the TV as shown in the
following illustration.
• When transporting the TV, do not expose the TV to jolts or
excessive vibration.
• When transporting the TV, keep the TV upright; never turn the TV
on its side or tilt towards the left or right.
• When handling the TV, be careful not to damage the protruding
buttons.
• Avoid touching the screen at all times, as this may result in
damage to the screen.
• Do not place the product on the floor with its front facing
down without padding. Failure to do so may result in
damage to the screen.
• When attaching the stand to the TV set, place the screen
facing down on a cushioned table or flat surface to protect
the screen from scratches.