LG 43LF6350 Manual Del Usuario página 8

Basic functions
When the TV is turned off, place
your finger on the joystick button,
press it once and release it.
Power On
When the TV is turned on, place
your finger on the joystick button,
press it once for a few seconds, and
release it. All running apps will close
and any recording in progress will
Power Off
stop.
Place your finger on the joystick
button and move it left or right to
adjust the volume level.
Volume Control
Place your finger on the joystick
button and move it up or down to
adjust the channel.
Channels
Control
NOTE
y Move the joystick button up, down, left, or right.
y
Be careful not to press it. If you press it first, you
may not be able to adjust the volume or scroll
through the channels.
Adjusting the Menu
When the TV is turned on, press the joystick button
one time. You can adjust the menu items moving the
joystick button up, down, left, or right.
Turns the power off.
Accesses the quick settings. (Depending upon
model)
Clears on-screen displays and returns to TV
viewing.
Changes the input source.
Mounting on a Table
(Image shown may differ from your TV.)
1 Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (minimum) space from the wall
for proper ventilation.
10 c m
8
10 cm
10 c m
m
1 0 c
2 Connect the power cord to a wall outlet.
CAUTION
y Do not place the TV near or on sources of heat,
y
as this may result in fire or other damage.
Using the Kensington Security System
(optional)
(Depending upon model)
(Image shown may differ from your TV.)
The Kensington security system connector is located
at the rear of the TV. For more information of
installation and using, refer to the manual provided
with the Kensington security system or visit
www.kensington.com
. Connect the Kensington
security system cable between the TV and a table.
NOTE
y The Kensington security system is optional. You
y
can obtain additional accessories from your local
dealer.
Securing the TV to a Wall (optional)
(Depending upon model)
(Image shown may differ from your TV.)
1 Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
http://