N OTE: Be sure to thoroughly clean and remove all debris from the water
supply pipe before it is installed. This will prevent clogging in the spray
outlet.
1) Slide the escutcheon onto the
shower arm.
Wrap an adequate amount of
pipe tape around the shower arm
threads. Thread the shower arm
into the supply elbow.
2) Check to make sure that the flow
regulating check valve is installed.
Thread the showerhead assembly
onto the shower arm until tight.
3) Slide the escutcheon back up
against the wall.
INSTALLATION PROCEDURE
4
Escutcheon
Shower Arm
Showerhead
Flow Regulating
Assembly
Escutcheon
Pipe Tape
Check Valve