NeuLog NUL-224 Guia Del Usuario página 19

Connecting to the flow sensor
There are a few options for connecting the probe
attachment to a water source:
1. Directly to a faucet using the threaded inlet and
outlet pipes.
2. Connecting the inlet and outlet pipes to the sample
being tested through the rubber hosing.
3. Connecting the probe to a ruler and submerging it
directly into water (a river for instance) to take flow
measurements. The flow sensor is meant to be used
for liquids and not air.
Included with sensor
 NeuLog General Guide.
 Flow sensor probe attached directly to the sensor's
body by a durable rubber-coated wire.
Range and
operation
modes
ADC resolution
Resolution
Max sample
rate (S/sec)
Experiment Duration: 1 second to 31 days.
V2018.01
19
Sensor specifications
0 to 5 m/s 0-133 ml/sec 0-8000 ml/min
0.08 m/s
Digital
2 ml/sec
100
Home
33 ml/min
English