Perel TC78011LCD Manual Del Usuario página 7

7. Operation
7.1 General Operation
1. Insert the power plug into the mains.
2. Press the on-off button. The display blinks once and the appliance is ready for use.
3. Press MODE to enter the setting mode.
4. Select the measurement unit with °C/°F.
5. Now, set the temperature with the increase/decrease button. The set temperature value
will be displayed.
6. Press MODE again to enter the timer switch-on mode. Set the switch-on timer with +/-.
7. Press MODE again to enter the timer switch-off mode. Set the switch-off timer with +/-.
8. Press MODE again to confirm. The heater will start at power level III. Press the on/off
button once to select power level II, press twice to select power level I, press thrice to
switch off the heater.
9. Switch off and disconnect the appliance after use.
7.2 Overheating Protection
This heater is equipped with an overheating protection, which will automatically switch off the
heater in case of overheating. If this occurs, please unplug from the mains and allow cooling
for 30 minutes before re-connecting and switching on again.
To avoid overheating, check that the appliance is sufficiently ventilated and that the air intakes
are unobstructed. Please contact your local dealer if the heater keeps switching off.
V. 03 – 23/09/2021
TC78011LCD
7 ©Velleman Group nv