Página 2
Warranty Information Read Before Beginning Assembly ● Call our toll free number if you need assistance. DHP warrants this product to be free from defects in material and workmanship and ● Work in a spacious area and near where the unit will be used, preferably on a agrees to remedy any such defect.
Página 3
Parts Replacement Parts, visit www.dhpfurniture.com/eng/replacement-parts This item is packed in 2 boxes! All parts listed on this page are in Box A. If Box B is missing please contact your Retailer. There are inner box(es) that include components required to complete this assembly. Armrest Armrest Wooden Slat...
Página 4
Parts Replacement Parts, visit www.dhpfurniture.com/eng/replacement-parts This item is packed in 2 boxes! All parts listed on this page are in Box B. If Box A is missing please contact your Retailer. There are inner box(es) that include components required to complete this assembly. Back Rest Front Panel Front Panel...
Página 5
Hardware Pack:Daybed Hardware Pack #: T4418439N-00 1/4" X 3/4" 1/4"X 1 3/16" X 20 1/4"X 1 9/16" X 12 Allen Key 4mm Please do not completely tighten all the hardware, until the entire assembly is complete, unless otherwise indicated in the step-by-step instructions.
Página 6
Hardware Pack: Trundle Hardware Pack #: T4144719LS-01 1/4" 1/4" X 3/4" 1/4"X 1 3/8" 1/4"X 1 9/16" Allen Key 4mm Please do not completely tighten all the hardware, Wrench until the entire assembly is complete, unless otherwise indicated in the step-by-step instructions.
Página 7
The following instructions will illustrate how to assemble the Daybed from Step 1 to Step 7. Please use the Daybed Hardware Pack: T4418439N-00. Attach Z x 4 and L x 4 to C & D as illustrated below. Do not completely tighten the to C and D, leave half of the Screw Bolts, leave half of thread...
Página 8
Attach V and W to A with Small holes on V & W should be facing upward.
Página 9
Hang A on C & D as illustrated below, don't completely tighten the BOLT until STEP 4 is complete.
Página 10
Flange of bracket on E must be located on the inside of the bed. Attach E & F & U to C and D with Then properly tighten all the Bolts . Slat holes on part E & F should be facing upward. X 12...
Página 11
Stretch and stick the bottom edge of A onto U as illustrated.
Página 12
6.1 Attach B to E with 6.2 Attach K to A with Holes on part K should face upward. X 12...
Página 13
7.1 Insert O into X; 7.2 Press X into K, repeat the same procedure for the opposite side of the bed with a new O and X to press X into E. 7.3 Insert ends of both slat O into Y, then press Y into F as illustrated.
Página 14
Caster holes on H towards upward. The following instructions will illustrate how to assemble the Trundle from Step 8 to Step 12. Please use the Trundle Hardware Pack: T4144719LS-01. 8.1 Lay H x 2 on the floor with holes towards upward as illustrated.
Página 15
Attach I x 2 & J to H x 2 with using ❹ ❻ using...
Página 16
❶ Attach P x 2 & N x 2 to H x 2 with In order not to damage your product, please orient lever to the inside of the trundle as illustrated. Caster N should be assembled on the side near Part J.
Página 17
Turn over the frame assembled from STEP 10. ❸ Attach G to J with Check if slat holes on I & J are all on the top side in this STEP.
Página 18
12.1 Insert O into X; 12.2 Press X into J, repeat the same procedure for the opposite side of the trundle with a new O and X to press X into I; 12.3 Insert ends of both slats O into Y, then press Y into I as illustrated.
Página 19
Helpful Hints To use Trundle: How to lock caster? How to unlock caster? Pull out the trundle completely from underneath daybed. Once positioned, make sure casters are locked by pushing down the lever " " as illustrated "How to lock caster!".
Página 20
Weight Limit: Helpful Hints Helpful Hints Daybed: 400 Lb / 181 Kg Trundle: 250 Lb / 113 Kg ● Move your new furniture carefully, with two people lifting and carrying the unit to its new location. ● Your DHP furniture can be disassembled and reassembled to move.
Página 21
4418439N NO LO REGRESE A LA TIENDA ! Si le faltan piezas o las que se incluyen están dañadas, con Diván con cama deslizable mucho gusto le enviaremos sus piezas de reemplazo sin cargo extra. Individual Visite www.dhpfurniture.com/spa/replacement-parts Terciopelo gris...
Página 22
Partes Instrucciones Paso 1 Las instrucciones siguientes ilustrar án c óm o ensamblar el Div án del Paso 1 al Paso 7. Piezas de reemplazo, visite www.dhpfurniture.com/spa/replacement-parts Utilice el paquete Daybed Hardware:T4418439N-00. Una Z X 4 y L X 4 con C & D; Este artículo se embala en 2 cajas! ❷...
Página 23
Límites de peso: 400 Lb / 181 Kg Límite de peso cama deslizable: 250 Lb / 113 Kg Consejos útiles ● Mueva sus muebles nuevos con cuidado, con dos personas levantando y llevando el aparato a su nueva ubicación. ● Sus muebles DHP se pueden desmontar y volver a ensamblar en caso de mudanza.
Página 24
4418439N NE RETOURNEZ PAS AU MAGASIN ! Si une pièce est manquante ou endommagée, nous vous Lit d'appoint avec lit gigogne expédierons avec plaisir vos pièces de remplacement gratuitement. Lit une place Visitez www.dhpfurniture.com/fre/replacement-parts Velours gris ou appelez au 1-800-267-1739...
Página 25
Pièces Instructions Étape 1 Les instructions suivantes illustreront comment assembler le Divan de l'étape 1 a Pièces de rechange, visitez www.dhpfurniture/fre/replacement-parts l'étape 7. S'il vous plaît utiliser l'emballage coque: T4418439N-00 Attacher Z x 4 et L X 4 à C & D. Cet article est emballé...
Página 26
Limite de Poids: 400 Lb / 181 Kg Limite de Poids lit gigogne:250 Lb / 113 Kg Conseils utiles ● Déplacez votre nouveau mobilier avec soin, nous recommandons deux personnes pour soulever et transporter le mobilier vers son nouvel emplacement. ●...