Toolland HGG400N Manual Del Usuario página 4

4. Loading the Gun
Refer to the illustrations on page 2 of this manual.
4.1
4.2
4.3
5. Operation
1. Connect the coupler of the grease gun to the equipment that needs to be greased.
Refer to the technical specifications below and verify that the grease gun and
equipment are compatible.
2. Use the gun lever to release grease from the grease gun.
6. Technical Specifications
capacity ...................................................................................0.85-0.95 g / stroke
operating pressure ..................................................................................... 345 bar
dimensions ............................................................................... 360 x 110 x 60 mm
barrel dimensions ............................................................................ Ø 56 x 280 mm
weight ....................................................................................................... 1185 g
volume ........................................................................................................ 400 cc
Use this device with original accessories only. Velleman nv cannot be held
responsible in the event of damage or injury resulting from (incorrect) use of
this device. For more info concerning this product and the latest version of this
manual, please visit our website www.toolland.eu. The information in this
manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights
reserved. No part of this manual may be copied, reproduced, translated or reduced to
any electronic medium or otherwise without the prior written consent of the copyright
holder.
V. 03 – 27/08/2020
Cartridge Loading [A]
Manual Loading [B]
Bulk Loading [C]
HGG400N
4 ©Velleman nv