Front Runner FANP001 Manual De Instrucciones página 4

2 FIT AND SECURE
2.4
2.5
2.6
FANP001_REV_A00
4
Join the Front LH and Rear LH Foot Rail
(Items 1 & 2) with the Joiner Plate
(Item 3) using M6 x 16 Buttom Head
Bolts, M6 x 12 x 1SS Flat Washers and
M6 Nyloc Nuts (Items 4, 5 & 6).
Place M6 Nut Caps (Item 7) over all the
4mm
Nyloc Nuts.
Repeat this for the Front RH and Rear RH
Foot Rail.
10mm
Place a bead of silicone around each
M8 x 40 Hex Bolt (Item 8).
Secure the Foot Rail using M8 x 40
Siliconed Hex Bolts, M8 SS Spring Washers
M8 x 19 x 2SS Falt Washers (Item 8, 9
& 15) as shown.
Take care not to move the spacers palced
13mm
step 2.3.
4 © COPYRIGHT 2017 FRONT RUNNER VEHICLE OUTFITTERS
13mm