Front Runner FALD006 Instrucciones De Montaje página 4

2 FIT AND SECURE
2.4
3 FIT AND SECURE
2.1
2.4
3.1
Refer to RRSTUNI when assembling your Slimline II Tray.
3.2
3.3
2.2
3.4
Center the rack and tighten fully. Use M8 nut caps (Items 10) to finish off the nuts.
FALD006_REV_A00
4
Place the assembled Foot Rails from
Step 2.3 over the studs in the vehicle's
ditch. Loosely fit the Foot Rails using
M8 x 16 x 1.6SS Flat Washers and M8
Nyloc Nuts (Items 9 & 10).
13mm
Push the Foot Rails all the way to the
back of the vehicle before you fully
tighten the Nyloc Nuts.
Place M8 Nut Caps (Item 8) over all the
Nyloc Nuts.
4MM
Make sure that the wind deflector is
installed before you proceed to the next
step.
Fit your roof rack to the Foot Rails using
M8 x 20 Hex Bolts, M8 x 16 x 1.6SS Flat
Washers and M8 Nyloc Nuts (Items 9, 10
& 11).
13mm
4 © COPYRIGHT 2016 FRONT RUNNER VEHICLE OUTFITTERS