Publicidad
But, there is possibility under some PlayStation
to correspond to buttons "R1/L1".
This function provides the gearshift with better compatibility against different PS3 games. Follow these steps to
set it:
a. The default setting for the Gearshift UP/DOWN corresponds to "R2/L2".
b. If a PS3 game requires it to correspond to "R1/L1, just press and hold button "12 (R3)", then press "MODE
(PS)" button once, the Gearshift UP/DOWN function now corresponds to "R1/L1".
c. If you need to adjust this setting back to "R2/L2", follow step b again.
d. You can change the buttons setting at any time.
Note: This function may be required mostly under PlayStation
9. Care Of the Unit
The TwinWheel 900FF is a well-designed mechanical device. However, it still requires a degree of care in its
use and storage. Follow these guidelines when using, connecting or storing the TwinWheel 900FF:
a. Do not expose the unit to direct sunlight for long periods of time, as this will cause the plastic to fade and
become brittle.
b. Do not spill liquids on the unit. If you accidentally spill anything on the TwinWheel 900FF, use a dry clothe
immediately to clean it.
c. Do not use any detergents or cleaners on the TwinWheel 900FF.
®
3 games; the gear shift's UP/DOWN function may be required
®
3 games.
68
АЗА
Publicidad
