Publicidad
Idiomas disponibles
Idiomas disponibles
● Function List of Control Panel
1.
LED display:
Adjusting range from 1.0-6.0(1/32 to Full) for Flash and modeling lamp.
2.
Modeling Lamp indicator:
When press the Modeling Lamp switch: The upper indicator is on means modeling lamp can adjust synchronously.
The lower indicator is on means modeling lamp can adjust independently. When both indicators are off, modeling
lamp will be switch off.
3.
Modeling lamp adjusting key:
It can adjust the output power of the modeling lamp by upper and lower key.
4.
Buzz Sound switch:
When Buzz indicator is on , buzz will sound during charging and stop sound when full charge , modeling lamp is on
when light flash. When buzz indicator is off and no sound during charging, press modeling lamp selection key now,
modeling lamp is off when light flash and after full charge modeling lamp is on.
5.
Test button:
Flash light can be fired by press the TEST button.
6.
Flash Power adjusting key:
This key can adjust the flash output from high to low or low to high.
7.
CELL-Slave mode selection key:
This key have five different types of Slave sync mode ( 1 to 5 position):
(1) Normal sync mode (when flash light flash, synchro can make another light flash at once)
(2) 0.5S delay sync mode (Synchro do not trigger during the first flash, the second time flash will trigger and flash
synchronously after 0.5 Sec)
(3) Twice trigger delay sync mode (Synchro do not trigger during the first flash, the second time flash will trigger
and flash synchronously)
(4) Thrice trigger delay sync mode (Synchro do not trigger during the first and second flash, the third time flash
will trigger and flash synchronously)
(5) Quartic trigger delay sync mode (Synchro do not trigger during the first, second and third flash, the fourth time
flash will trigger and flash synchronously)
www.fotimaimport.com
/
info@fotimaimport.com
Publicidad
