Duronic LS1008/B Manual De Instrucciones página 6

You may start to weigh according to the weighing procedure below.
If there is not any operation and the weight is steady in weighing mode,
2. Weighing (Unit KG selected)
a) Press " " to switch on.
b) Wait until the scale calibrates to zero.
c) Attach the strap to the luggage
handle and raise it up.
d) The weight will be locked and a 'beep'
indication will sound when stable.
If you want to weigh again, put the luggage down, wait a few seconds,
3. Tare function (Unit KG selected)
a) If there is a weight shown on
the LCD before weighing, e.g:
b) Press " " to set it to zero.
c) It is now ready to use.
the scale will turn off automatically after 30 seconds.
then lift your luggage with the scales again.
There is no need to complete the calibration again.
You can also change luggage.
Note:
Note:
6