EN
4
IMPORTANT SAFEGUARDS
Read these instructions carefully and retain them for future
use. If this product is passed to a third party, then these
instructions must be included.
When using the product, basic safety precautions should always be
followed to reduce the risk of injury including the following:
•
Make sure, that the mounting surface can support the weight of the
product. Plasterboards are not a suitable mounting surface. If you
need to install the product on a plasterboard, make sure to drill into
the studs behind the plasterboard.
•
This product requires 3 people for safe installation.
•
Use only with non-permanent markers.
•
When drilling holes, make sure that you do not damage any cables
or tubes behind the wall.
Before First Use
•
Check for transport damages.
D ANGER
Risk of suffocation! Keep any packaging materials
away from children – these materials are a potential source of danger,
e.g. suffocation.
Cleaning and Maintenance
Cleaning
•
To dry-erase the board, use the provided eraser (G) only.
•
Clean only when erased.
•
To clean, wipe with a soft, slightly moist cloth.
•
Never use corrosive detergents, wire brushes, abrasive scourers,
metal or sharp utensils to clean the product.
Maintenance
•
Store in a cool and dry place away from children and pets, ideally in
original packaging.
•
Avoid any vibrations and shocks.