Publicidad
Idiomas disponibles
Idiomas disponibles
SET UP & USE
OPERATING INSTRUCTIONS
Place the heater on a firm, level surface and plug the unit directly into a 120 V AC
electrical outlet.
NOTE: Only operate heater in upright position.
1. Turn the thermostat knob clockwise (right) direction until it reaches the maximum
setting.
2. Turn the heat control knob clockwise (right) from the OFF position to the
FAN ONLY ( ), LOW (
) (750 watts) or HIGH (
) (1500 watts).
LO
HI
The power indicator light turns on when either the, FAN, LOW or HIGH setting is
selected.
When the desired temperature/comfort level is reached, lower the thermostat knob
until the heater stops operating. The thermostat will automatically maintain the
desired temperature level by cycling the heater on and off.
NOTE: Turning the TEMPERATURE control knob clockwise will increase the
temperature setting.
Turn the fan/heat control knob to "OFF" to shut off the unit.
FAN
750 WATTS
1500
WATTS
LO
HI
Temperature control knob
Power selection knob
Page 8
Publicidad
