Publicidad
Installation
Once the Griddle has been placed in position by consulting International Standards and regulations. Cleaning
the steel plate thoroughly is advised. Before first use, please warm up the unit for 10 minutes until all smoke
and/or odor has dissipated. Turn off the thermostat, unplug the unit, then use warm, soapy water to clean, After
cleaning. The Griddle is ready to operate.
Operation
Turn on the unit prior to allow the cooking surface to warm up about 20 minutes.
Put the food on the grilling plate, turn the thermostat dial to the required setting and cook. General cooking
temperature is between 200°C and 220°C. This may vary for particular kind of foods if needs. When not
cooking, the thermostat is turned down, unplug the unit.
Maintenance
The Griddle should be cleaned using warm, soapy water after each day's operation.
For cleaning grilling plate, please use warm soapy water while still warm. Do not use cold water on warm plate.
After cleaning, be sure the trays should be dry before putting them back to the unit.
Do not immerse completely in water to clean.
The appliance is not to be cleaned with a water jet.
HELP
If the Griddle does not work, please check the following:
•
The power supply is correct and the thermostat is turned on.
•
The thermostat is correct.
•
The element is clear.
6
Publicidad
