B&G electronics VCI-O2 Manual De Instalación Y Operación página 2

VCI-O2 VCI-02
LOCATION OF THE COMPONENTS
Front cabin module
VCI-02D
WIRING DIAGRAM
VCI-02D
Auxiliary speaker
output
UTP output
Power harness
input
* If the UTP cable's lenght is not enough to connect the modules, use the junction box
(optional) to add extra UTP 4-pair cable (aditional UTP cable not included).
Rear cabin module
VCI-02R
Junction box*
VCI-02R
UTP cable
Red
Black
Yellow
Battery
Accessories
VCI-O2 VCI-02
2 2
FRONT CABIN MODULE (VCI-02D)
Microphone
Power indicator
Activity indicator
Switching on
To switch the equipment on, turn the volume knob clockwise until you hear a click and
the power indicator lights up.
Switching the equipment ON/OFF is a function only controlled from the front module.
Volume control
Use the knob to control the volume level of the incoming audio.
• Volume up: turn the knob clockwise.
• Volume down: turn the knob counterclockwise.
Push to talk
To open the front
talking to the rear cabin.
Light indicators
• Red: indicates that the equipment is on.
• Green: indicates the system's operation mode according to the light pattern.
Steady on: indicates that the rear
Blinking on: the indicator blinks when the front
while the user on the rear cabin is trying to communicate as well (namely, that the rear
PTT button was pushed while you were pushing the front PTT button).
Switching off
To switch the equipment off, turn the volume knob counterclockwise until hearing a
click; the light indicators will then turn off.
UTP output
REAR CABIN MODULE (VCI-02R)
Power indicator
Mode selector
(manual / hands-free)
Activity indicator
rear communication channel, press PTT and hold it while you are

front communication channel is open.

rear communication channel is open

3 3
Push to talk
(PTT)
ON/OFF
Volumen control
Push to talk
(PTT)
Volume control
Microphone