Publicidad
90500507
32
OPTIONAL
Trailer Simulator
for 7- and 13-pin
Sockets
Part-no.
50400516C
34
Set up trailer operation
General
After installation of the electrics kit, the mandatory trailer lighting and the trailer indicator monitoring that is required by law in some countries,
operates automatically with no additional software!
Any defect in the trailer direction indicators is shown by a bulb failure symbol on the information display on the instrument panel.
Vehicles with parking assistance
Deactivation of the reversing parking sensors when towing a trailer, can be programmed by the dealer using the dealer diagnostic assistance system.
This is simply carried out
by following the coding procedure below (not CL203) :
· control devices
· construction
EZS - electronic starter
· control device adjustment
· read the coding and change if necessary
· trailer (switch to "present")
· execute coding (F5)
After coding, to deactivate the rear parking sensors, there is an additional warning of trailer indicator failure, by the double flash rate of the direction
arrows on the instrument display, and as an extended defect report in the information display section of the instrument panel.
36
/
87040988/16.01.2018
PF Jones Ltd, Nuttall street, Old Trafford, Manchester, M16 9JA, Tel- 0161 872 4755 email- info@pfjones.co.uk web- www.pfjones.co.uk
everse
33
35
Optional: Adapter socket 6240001
13-pin
7-pin
(also CL203)
11/13
Publicidad
