Publicidad
Idiomas disponibles
Idiomas disponibles
Operation Mode
1
Press the ON/OFF BUTTON to Turn on the unit
The unit will respond with a beep.
2
Open the cover of the remote controller and press the operation mode button. Each time
the button is pressed, the operation mode is shifted in the direction of the arrow.
(For Heating Model)
Cooling
Open the cover of the remote controller and press the operation mode button. Each time
the button is pressed, the operation mode is shifted in the direction of the arrow.
(For Cooling Model)
3
For cooling or heating operation set the desired indoor
temperature by pressing the ROOM TEMPERATURE
SETTING BUTTONS.
For cooling the temperature can be set within 18°C~30°C and
for heating the temperature range is 16°C~30°C.
4
Set the fan speed with the remote controller.
You can select the fan speed in four steps : low, medium, high and natural wind by
pressing the INDOOR FAN SPEED SELECTION BUTTON
Each time the button is pressed, the fan speed mode is shifted in the direction of the
arrow.
Natural Wind
Natural wind
For fresher feeling, press the INDOOR FAN SPEED SELECTION BUTTON and set to Natural wind mode.
In this mode, the wind blows like a natural breeze by automatically changing fan speed.
Auto Operation
Healthy
Dehumidification
Cooling
Auto Operation
Step1(Low)
Step2(Medium)
Operating Instructions
Heating
(Heat pump model only)
Healthy
Dehumidification
Step3(High)
Owner's Manual
11
Publicidad
