Publicidad
Idiomas disponibles
Idiomas disponibles
Using poWerbot
you must turn on the emergency switch on the bottom of the unit before using poWerbot.
turning the power on/off
press the
3 seconds
button for more than
ENGLISH-12
• When POWERbot is not used for
30 minutes, power will turn off
WARNING
automatically.
- You can turn on the power only by
using the buttons on POWERbot.
Starting auto clean mode
Press and release this button. The POWERbot
moves and cleans automatically until the battery is
depleted.
✻ ✻ Stop cleaning: Press and release the
Selecting a cleaning mode
You can select the desired cleaning mode by
pressing these buttons. See the next page for
details.
recharging/energy-saving
mode
fRecharging
You can command POWERbot to recharge at the
docking station automatically while it is cleaning
by pressing this button.
fEnergy-saving mode
Refer to page 14.
button
Publicidad
