Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
(Continued)
• Save all instructions
E
Installing Trimmer Line:
WARNING
Use 0 .095, 0 .105 or 0 .155 inch diameter flexible,
nonmetallic line with Trimmer . Never use alternative cutting
members such as wire or wire-rope, which can become a
dangerous projectile .
For 0.095 and 0.105 Inch Diameter Line: (Fig . 22-25)
1 .
Stop the engine and remove spark plug lead .
2 .
Cut two lengths of new trimmer line 16 .5 inches long .
Use the instructions on the left handle to gage the
proper cut length .
3 .
Insert one end of string into the side opening and
route around the rear and out the opposite side
opening . (Fig 22)
4 .
Pull string so that equal lengths are on each side .
5 .
While pushing tab inward, route one end back
through side opening and out the front of retainer .
(Fig . 23 and 24)
6 .
Likewise, route the remaining end through its side
opening and out the front of retainer . (Fig 25)
7 .
Adjust string so equal lengths extend from retainer .
8 .
Repeat on opposite side .
For 0.155 Inch Diameter Line: (Fig 26-27)
1 .
Stop the engine and remove spark plug lead .
2 .
Cut two lengths of trimmer line to 16 .5 inches . Use
the instructions on the left handle to gage the proper
cut length .
3 .
Insert through retainer tab and then outwardly
through metal loop . (Fig 26)
4 .
Pull string so that equal lengths are on each side .
F
Techniques / Applications:
Trimming Tip
To extend the life of the trimmer line, keep the trimmer line moist . If not kept moist, the nylon line will become dry and
brittle . Keep extra trimmer line in a container of water . The line will stay flexible and easy to change . A flexible line will
also last longer .
NOTICE
It is recommended that the engine air intake screen be cleaned every time the trimmer line is replaced . Failure to keep
the air intake screen clean may result in overheating and damage to engine .
(See instructions under the Maintenance section)
WARNING
Thoroughly inspect the area where the Trimmer is to be used and remove all foreign objects . Your equipment can throw
small objects at high speed causing personal injury or property damage .
Your Trimmer is most effective when using the tips of the trimmer line for trimming grass and other vegetation . Do not
force the trimmer line into grass or vegetation faster than Trimmer's cutting speed permits. Forcing the Trimmer will
cause your Trimmer to be less effective, and may cause the engine to overheat .
Questions? Call Toll Free at 1-800-737-2112
5 .
Route one end back through wire loop . (Fig 27)
6 .
Likewise, route the remaining end through wire loop .
7 .
Adjust string so equal lengths extend from the
trimmer head .
8 .
Repeat on opposite side .
EN-10
Copyright © 2017 MAT Engine Technologies, LLC
Fig. 22
Fig. 24
Fig. 26
Fig. 23
Fig. 25
Fig. 27
Publicidad
