Samsung HW-K430 Manual Del Usuario página 16

CONNECTIONS
CONNECTIONS
● Do not connect the power cord of this product or your TV to a wall outlet until all connections between
components are complete.
● Before moving or installing this product, be sure to turn off the power and disconnect the power cord.
CONNECTING THE SUBWOOFER
CONNECTING TO THE SUBWOOFER AUTOMATICALLY
The Subwoofer's linking ID is preset at the factory and the main unit and subwoofer should link (connect wirelessly)
automatically when the main unit and subwoofer are turned on.
• When the subwoofer is completely connected, the blue LED Link Indicator on the subwoofer stops blinking and
glows continuously. The subwoofer's LED indicator modes are listed below:
blue
Auto-connection is complete.
1
blue
Auto-connection is not complete.
2
blinking
a. Is the power cord plugged into the outlet? If not, connect the power plug to the outlet.
blue is
3
not lit
b. If the power cord is plugged in correctly, check the Soundbar main unit.
CONNECTING TO THE SUBWOOFER MANUALLY
If the blue LED light does not stop blinking when the main unit and subwoofer are turned on, please set the ID by
following the steps below.
● Important: Before you begin, put the battery into the remote. See page 10 for instructions.
If your Soundbar main unit is off (in standby mode), the subwoofer will also be in standby
mode and the blue LED won't be lit.
16