Samsung HW-K430 Manual Del Usuario página 7

CONNECTING TO YOUR TV
You can enjoy TV sound after connecting the Soundbar to your TV with or without a cable.
c Important: Before you begin, put the battery into the remote. See page 14 for instructions.
Method 1. Connecting with a Cable
Check the DIGITAL AUDIO IN (OPTICAL)
port of the Soundbar main unit.
1. Connect the DIGITAL AUDIO IN (OPTICAL) jack on the Soundbar to the OPTICAL OUT jack of the TV with
a digital optical cable.
2. Press the button on the right side of the Soundbar or the SOURCE button on the remote control to
select the D.IN mode.
c If TV sound is not output, press the
on the remote control to select the D.IN mode on Soundbar main unit display.
c Press the  button on the remote control for 5 seconds to turn Auto Power Link on or off.
(Auto Power Link is set to ON by default.)
Optical Cable
DIGITAL AUDIO IN
(OPTICAL)
DIGITAL AUDIO IN
(OPTICAL)
USB (5V 0.5A)
AUX IN
Bottom of the Soundbar
button on the right side of your Soundbar or the SOURCE button
· 7 · English
OPTICAL OUT
DC 24V 24 4 V V
D.IN
Check the OPTICAL OUT
port of your TV.