Using the Remote Control (continued)
2
Using the remote control
The operation of the remote control buttons works
□
the same as the buttons on the front panel of the
fireplace/heater. Review the Operation section for
more information on the functionality of these
buttons.
NOTE: The remote control cannot lock/unlock
the flame and heating function, and it cannot
switch between Fahrenheit and Celsius
Care and Maintenance
WARNING: Always disconnect from the power supply
before cleaning the heater. First turn off the main power.
Then remove the electrical plug from the wall outlet.
WARNING: Do not use this fireplace insert if any part of
it has been under water. Immediately call a qualified
service technician to inspect the firebox and replace any
part of the electrical system which has been under water.
The blower motor and flame motor are pre-lubricated for a durable using time and need no further lubrication or maintenance. To
remove any accumulation of dust or fluff the soft brush attachment of a vacuum cleaner should occasionally be used to clean the
outlet grille of the fan heater.
Use a soft, clean cloth that will not scratch the surface when dusting.
□
Use a clean soft cloth dampened with warm water to clean the fireplace surface. DO NOT use household or abrasive cleaners,
□
as these products may damage the surface.
When cleaning the glass viewing screen use a non-abrasive damp cloth with liquid cleaner or soft soap if necessary; DO NOT
□
use cleaning powders or any other substance with abrasives since these substances will scratch glass.
Under no circumstances should this product be operated with a broken or chipped glass panel.
□
Do not strike or slam the glass.
□
In the event that your appliance is stained or otherwise damaged during use, we recommend that you call a professional to
□
repair your furniture.
When not in use please unplug the cord from the outlet to prevent any damage or accidental plug of the cord.
□
Main Power
.
8
Heater Up
Heater Down
Heater Control
Flames Control
Timer Function