HAMPTON BAY HB1519L4-35 Guía De Uso Y Mantenimiento página 5

Installation
1
Mounting the hardware

Align the fixture pan (A) over the outlet
box.

Mark the location of the keyhole slots of
the fixture pan (A) onto the ceiling.
Remove the fixture pan (A) from the
ceiling.

Drill a 1/4 in. (6.4 mm) hole at the narrow
end of each keyhole slot marking on the
ceiling.

Carefully hammer a ceiling anchor (BB)
into each drilled hole.

Screw an anchor screw (CC) into each
remaining ceiling anchor (BB), but allow a
small portion of the anchor screw (CC) to
remain away from the ceiling.
2
Connecting the wires
NOTE: If you have electrical questions consult
your local electrical code for approved
grounding methods.

Attach the lanyard on the fixture pan (A)
to the outlet box using a lanyard screw
(DD).

Pull the power supply wires out from the
outlet box.

Connect the black supply wire to the
black fixture wire using wire nuts (AA).

Connect the white supply wire to the
white fixture wire using wire nuts (AA).

Connect the fixture ground wire and the
supply ground wire together using a wire
nut (AA).

Wrap all wire connections with electrical
tape for a more secure connection.
BB
AA
A
5
Please contact 1-855-HD-HAMPTON for further assistance.
BB
CC
DD
HAMPTONBAY.COM