Jung FMJ50700REG Instrucciones De Servicio página 11

Actuador persianas eNet 1 fase, carril DIN
Recall sun protection slat posi-
tion
Deactivate sun protection
blind position
Deacitvate sun protection slat
position
Priority, twilight
Activate twilight blind position
Activate twilight slat position
Deactivate twilight blind posi-
tion
Deacitvate twilight slat position 0 ... 100 %
Information window
During channel selection in the Information window, the following settings can be made or va-
lues displayed.
Display value
Position value, venetian blind
Position value, slat
Restraint
Lock-out protection
Operating hours UP
82581823
J0082581823
0 ... 100 %
Basic setting: 100 %
0 ... 100 %
Basic setting: 0 %
0 ... 100 %
Basic setting: 0 %
0...4
Basic setting: 0
0 ... 100 %
Basic setting: 100 %
0 ... 100 %
Basic setting: 100 %
0 ... 100 %
Basic setting: 0 %
Basic setting: 0 %
Explanations
The position value of the Venetian blind can
be changed.
The position value of the slat can be changed.
Display of forced position status.
Display of the lock-out protection status
Display of the operating hours in the UP direc-
tion since the last restart in the Settings win-
dow.
11/12
Defines the slat position of the
output on activating the sun
protection. Only visible when
the Venetian blind operating
mode is set.
Defines the behaviour of the
output on deactivating the sun
protection. Only visible when
the priority for the sun protec-
tion is 0.
Defines the slat position of the
output on deactivating the sun
protection. Only visible when
the priority for the sun protec-
tion is 0 and the Venetian
blind operating mode is set.
Specifies the priority for reca-
lling and removing a scene of
type Twilight for the channel.
Defines the behaviour of the
output on activating the twilig-
ht function.
Defines the slat position of the
output on activating the twilig-
ht function. Only visible when
the Venetian blind operating
mode is set.
Defines the behaviour of the
output on deactivating the twi-
light function. Only visible
when the priority for the twilig-
ht function is 0.
Defines the slat position of the
output on deactivating the twi-
light function. Only visible
when the priority for the twilig-
ht function is 0 and the Vene-
tian blind operating mode is
set.
23.03.2017