Publicidad
Idiomas disponibles
Idiomas disponibles
General
IMPORTANT! Prevent unintentional
!
starting by removing the ignition cable
from the spark plug.
Handle
Assembly
Top handle
Place the handlebar's tubular construction in direct
opposite to the lower part of the handlebar. Tighten the
knobs properly.
All but M40-125
M40-125
Use enclosed straps to secure cables to the handle. Do
not overstretch cables when mounting.
70 – English
ASSEMBLING AND ADJUSTMENTS
Settings
Handle height (all but M40-125)
•
Loosen the lower knobs.
•
Adjust the height. Tighten the knobs properly.
Cutting height
NOTICE! Do not set the cutting height too low as there
is a risk that the cutters might hit ground with
unevenness.
Move the lever to the back for higher cutting height and to
the front for lower cutting height.
M40-125, M46-125 has four controls, one for each wheel.
Publicidad
