Publicidad
Enlaces rápidos
Publicidad
Manuales relacionados para Samuel Heath V736-IS
Resumen de contenidos para Samuel Heath V736-IS
- Página 1 Product Data Sheet V736-IS Installation Kit REFER TO FITTING DEPTHS PRIOR TO INSTALLATION...
- Página 2 Installation Fitting Depths Dimension “A” Maximum And Minimum Depths Trim Set From Back Of Shower Valve To Plate Position (mm) V736 99.50 159.50...
- Página 3 Dimension Key V736-IS Note: For the correct installation depths (“A”) please see tables on page 2 as they may differ per trim set. Back...
- Página 4 Spares Information V736-IS Item Part No. Description Socket Cap Screws X 6 Washers (X6) Protective Moulding Socket Cap Screws X 5 Blanking Plugs X 2 O-Rings Protective Moulding O-Rings X3 Screw X 4 Washer X 4 Installation Body Dust Cover X 2...
- Página 5 Installation 1. Fit the installation kit (A) below the finished floor level in accordance with the sizes shown on the dimensional drawings in the front of this booklet. IMPORTANT NOTE: • Ensure the product is fixed securely to a suitably strong surface •...
- Página 6 Installation 2. Connect the hot & cold supply pipes as shown. IMPORTANT NOTE: • The product is fitted with a blanking cover (B), a pressure of 5 BAR should not be exceeded with this fitted • Do not leave the valve pressurised for prolonged period with the blanking cover assembled...
- Página 7 Installation 3. Remove the blanking nuts (C) to flush the system before installing the bath filler using suitable 1/2” BSP fittings (Not Supplied).
- Página 8 Installation 4. Ensure blanking nuts (C) are fitted to flush the system. IMPORTANT NOTE: • Do not exceed a pressure of 5 BAR. • Do not leave the installation kit pressurised with blanking cover (B) & blanking nuts (C) fitted.
- Página 9 Installation 5. Fit the protective moulding (D) to the product with supplies off & secure using screws (F). 6. Install the finished floor surface in accordance with the measurements in the front of this booklet.
- Página 12 5. Ceramic cartridges in hard water areas. To prolong the lifespan and reduce servicing periods of your Samuel Heath tap we recommend that a suitable water softener be fitted. Consult your installer/designer for details.