Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
(Control)
Q: My existing switch only has two wires. How do I properly connect the CONTROL
to the FAN?
A: You will need to test these wires with a voltage tester to determine which one is
power and which one goes to the fan. The black wire on the CONTROL connects to
the wire that is tested to be the incoming power. The red wire on the CONTROL
connects to the wire that is tested and confirmed to connect to the FAN. You will
need a neutral and a ground. Please refer to PAGES 18-20 for instructions on how
to properly wire the CONTROL. If you have any concerns, we suggest hiring or
consulting a licensed electrician.
Q: Will the CONTROL still work without a neutral wire?
A: A neutral is required to operate the CONTROL. Generally, there will be a neutral
wire available in your junction box (wall box). Older homes or homes where code
was not followed can make it a problem to find a neutral. If that's the case for you,
then you'll need an electrical testing device to find a neutral wire. We suggest you
use a qualified licensed electrician to do this work.
Q: I still have additional questions.
A: Contact us at info@reventfans.com or call our service department at
(877) 543-8698. We are happy to assist you with any additional questions.
25
Publicidad
