Publicidad
Idiomas disponibles
Idiomas disponibles
Mounting and Removing Flat Panel Screen
• Always use an assistant or mechanical lifting equipment to safely lift and position the flat panel screen.
3
Hook adapter brackets (BB or CC) onto wall
plate (AA). Then slowly swing screen in as shown.
Turn safety/security screws, using security allen
wrench (FF), clockwise at least six times to prevent
screen from being removed as shown in cross section
of fig. 3.1. Screen can be adjusted horizontally if
desired as shown in figure 3.2.
NOTE: To lock the screen down, tighten safety/
security screws to wall plate as shown in cross
section.
To remove screen from mount, loosen safety/security
screws, swing screen away from mount, and lift screen
off of mount.
CAUTION
• Do not tighten screws with excessive force.
Overtightening can cause damage to mount. Tighten
screws to 40 in. • lb (4.5 N.M.) maximum torque.
WARNING
BB or CC
AA
SAFETY/
SECURITY
SCREWS
CROSS SECTION
8 of 24
BB
or
CC
fig 3.2
ISSUED: 01-11-08 SHEET #: 202-9270-2 09-10-08
fig 3.1
Publicidad
