Cooper Lighting Solutions Metalux ST2L Instrucciones

ST2L Dimming Models
SC3 CCT Select Dimming Models
CCT Select INSTRUCTIONS
CCT Select INSTRUCTIONS
CCT Select INSTRUCCIONES
Selector Switch (3500K, 4000K, 5000K)
Choose your favorite correlated color
temperature (CCT) from 3 options
using the switch
Sélecteur (3500K, 4000K, 5000K)
Choisissez votre température de couleur
corréléé préféréé (CCT) de 3 options en
utilisant le commutateur.
Interruptor selector (3500K, 4000K, 5000K)
Elija su temperatura favorita de color
correlacionada (CCT) de 3 opciones
utilizando el interruptor.
ENGLISH
ITEMS REQUIRED
(Purchase separately)
• Phillips Screw Driver
• Hammer
• Wire Strippers
• Flat head Screwdriver
• Safety Glasses & Gloves
• Ladder
Risk of Fire, Electrical Shock, Cuts or other Casualty Hazards- Installation
and maintenance of this product must be performed by a qualified
electrician. This product must be installed in accordance with the applicable
installation code by a person familiar with the construction and operation
of the product and hazards involved. The light source contained in this
luminaire shall only be replaced by the manufacturer or his service agent or
a similar qualified person.
Risk of Fire and Electric Shock- Make certain power is OFF before starting
installation or attempting any maintenance. Disconnect power at fuse or
circuit breaker.
Risk of Fire- Minimum 90°C supply conductors.
Risk of Burn- Disconnect power and allow fixture to cool before handling or
servicing.
Risk of Personal Injury- Due to sharp edges, handle with care.
Failure to comply with these instructions may result in death, serious bodily
injury and property damage.
Questions? / Des questions? / ¿Preguntas ? 1-800-334-6871 ConsumerProducts@cooperlighting.com
PACKAGING CONTENTS/ CONTENIDO DEL PAQUETE/ CONTENU DU PAQUET
A. (1) Fixture channel
(1) Canal du luminaire
(1) Canal de la luminaria
C. Push in connectors or wire nuts
Conectores a presión o tuercas para cables
Emboîtez les connecteurs ou les serre-fils
WARNINGS AND CAUTIONS
Instruction Manual /Instrucciones/Directives
B. (1 or 2) Channel cover with LED's and lens assembly
(1 or 2) Couvercle du canal avec DEL et ensemble da
(1 or 2) Cubierta del canal con luces LED y Unidad de la
D. (1) Row D. Aligner
(1) Mécanisme d'alignement de rangée D
(1) Alineador de la Fila D.
DISCLAIMER OF LIABILITY: Cooper Lighting Solutions assumes no liability for damages or
losses of any kind that may arise from the improper, careless, or negligent installation, handling or
use of this product.
IMPORTANT: Read carefully before installing fixture. Retain for future reference.
NOTICE: Ground screw provided in proper location. Do not relocate.
NOTICE: Fixture may become damaged and/or unstable if not installed properly.
Note: Specifications and dimensions subject to change without notice.
ATTENTION Receiving Department: Note actual fixture description of any shortage or noticeable
damage on delivery receipt. File claim for common carrier (LTL) directly with carrier. Claims for
concealed damage must be filed within 15 days of delivery. All damaged material, complete with
original packing must be retained.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
INSTALLATION INSTRUCTIONS
Note: This product is intended for either single
mount or continuous row applications.
1. Turn off the power at the main fuse/breaker box.
Carefully open carton and remove fixture from
carton.
2. Remove channel cover from main body by
squeezing beneath locking tabs and lifting cover.
Do this for all locking tab locations (Fig. 1). Avoid
pulling on the ends of channel cover to prevent
bending.
3. Disconnect ground (green) and LED wires (red and
black) and set channel cover aside. Place channel
cover in a safe location.
4. Remove appropriate knockout(s) for power
supply wiring. (Fig. 2)
5. Wiring must comply with all applicable electrical
codes. (Figure 3)
BLACK – AC LINE
WHITE – AC NEUTRAL
PURPLE – DIM POSITIVE
PINK (or GRAY) – DIM NEGATIVE
GREEN & YELLOW – GROUND
1
la lentille
lente
Fig. 1
DRIVER/BALLAST
+ GROUND SCREW PRE-INSTALLED ON LUMINAIRE BODY
Fig. 3
Fig. 2