Hisense HAF2900D Manual De Instrucciones página 61

4.4.1. If the pot is removed at any time, the display will read "OPEN".
4.4.2. If one pan is removed during the cooking process, the corresponding side will stop
operating (both heating and motor will be stopped). It will resume operation based on
the most recent settings when the pot is replaced.
4.5. Cooking process is completed
4.5.1. When the cooking process is completed, the display shows "OFF" and beeps
5 times. Then, the display unit goes off, and the unit enters standby mode.
Notes
5. Boot mode: when in this mode, only the power key icon is illuminated.
6. Standby mode: the power key icon, the left pot key, and the right pot key icon are all illuminated.
7. Choosing the settings
7.1. Choosing the settings when unit is not operating
7.1.1. The corresponding function key is always on. The selected recipe indicator is
blinking, the rest of the menu indicators are always on, and the corresponding
display unit is blinking alternately to show the temperature/time of the selected
recipe. When adjusting the menu, the selected recipe is blinking. To set the
temperature, press the temperature key. The display unit is blinking to show the
current temperature. Press the time key to adjust the time; the display is blinking and
shows the current time. When the appliance is in the double-pot operating mode the
menu for the side that is not selected will not flash; the corresponding display will
alternately show the temperature and time without flashing. During this process, the
heaters and motors do not operate.
7.2. Choosing the settings during the cooking process
7.2.1. During the cooking process, the menu does not flash; rather, only the selected recipe
icon is illuminated. The display unit flashes, alternately showing temperature and
time. The temperature and time can be adjusted as described under 3.1.3 and 3.1.4,
but the recipe cannot be adjusted. The heater and fan operate continuously.
7.3. Pause the operation: the corresponding function key is always on; the selected menu
indicator flashes, while other menu indicators are always on. The corresponding display
flashes, alternately displaying the temperature and time of the selected menu. The heater
and the fan stop operating; now, the menu, time, and temperature can be adjusted.
7.4. Operating process: the corresponding function key is always on, the selected recipe
indicator is always on, and the rest of the menu indicators will be off. The corresponding
display shows the remaining time of the selected recipe, and the heater and fan operate
continuously. When both pots are in operation at the same time, the left pot key icon and
the corresponding left pot recipe icon will flash simultaneously once every 6 seconds.
3 seconds later, the right pot key icon and the corresponding right pot recipe icon will flash
simultaneously once every 6 seconds.
8. Memory function: the appliance has a memory function. For example, if you select the chicken
wings menu for the right pot, and set the temperature to 190 °C and the time to 22 min, after the end
of use, if the appliance is not powered off, the same settings will be applied when you select the right
pot during next use, i.e., the chicken wings menu will be displayed directly, with temperature set at
190 °C and the time set at 22 min. The memory is cleared when the machine is powered off for 1 hour.
If you power on the appliance after one hour and select the right pot, the initial state will be displayed.
9. Power off memory: If the appliance is accidentally powered off during use, it will return to the
settings active before the power failure, as long as power supply resumes within 30 minutes.
52