essentiel b MS-E-200-D Instrucciones De Uso página 25

connecting the mini-stereo to an auxiliary source
The 3.5 mm jack plug enables you to connect an audio player, and play music from this player to the
mini-stereo speakers.
Cable
Jack/Jack 3.5 mm
Plug the end of a 3.5mm jack/3.5mm jack cable (not supplied) into the LINE IN jack on the front of
1.
the appliance.
Plug the other end into the audio output jack of your media player. Refer to the supplier's operating
2.
manual for more information.
Select the LINE IN source by repeatedly pressing the
3.
control.
Begin playback on your auxiliary source; the sound travels through the mini-stereo speakers.
4.
48
V.1.0
connecting the mini-stereo to an auxiliary source
button on the mini-stereo or the remote
maintenance and cleaning
Cleaning the appliance
Always unplug the appliance from the mains before cleaning.
1.
Clean the device only with a soft, dry cloth.
2.
Do not use liquid cleaners or aerosol cleaners.
3.
Notes on the discs
DISK HANDLING
Hold the disc by the ends and make sure that your fingers do not
touch the playing surface. Do not glue paper or put stickers on the
discs.
CLEANING THE DISCS
Fingerprints and dust on a disc can cause poor quality sound
and sound distortion. Before playing, clean the disc with a
clean, dry cloth from the centre to the ends.
Never use alcohol, benzene, thinner, cleaning fluid or other
chemicals.
Do not use compressed air to clean dust.
STORING THE DISCS
Store the disc in its case after use.
Do not expose the discs to very cold, humid or hot environments.
Never leave it in a parked vehicle in direct sunlight.
DISCS THAT ARE DAMAGED AND OUT OF SHAPE
Do not use cracked, chipped, warped, or otherwise damaged discs as
they may damage the player.
This player is designed to be used only with traditional, fully circular discs.
Do not use discs of any other shape.
Never lift or move the appliance during playback: discs rotate at high
speed and may be damaged.
49
V.1.0
maintenance and cleaning