Abus HDCC31500 Manual De Instrucciones página 21

5. Mounting/installation
5.1. Mounting the camera
IMPORTANT!
The camera must be disconnected from the power supply during installation.
Loosen the fixing screws for the camera cap and remove them. Use
the accompanying drilling template for drilling the mounting holes.
If the cable is to be routed through the side, first guide the connecting cable through the base
plate and the side opening on the base plate.
Now fix the base plate in place.
Then fix the camera centre section in place by attaching the camera cap. Loosely tighten the
fixing screw for the camera cap to allow you to perform camera orientation.
21
English