babymoov A014411 Instrucciones De Uso página 16

- Temperature alarm: ON
- Select alarm time repitition (5 s, 10 s, 30 s, 1 min)
H34 & H35. Volume
- Volume from 1
Problem
• No audio or video signal is transmitted.
• Permanent transmission.
• Alarm out of range permanently activated.
• The image on the screen is not
homogeneous or is fixed or appears in
black and white.
• Lots of static noise and interference.
• Range of action too small.
16
/ OFF
ON
to 6 .
1 6
TROUBLE SHOOTING TABLE
Possible Causes
• The microphone's sensitivity is too low.
• The mains adapter is not connected correctly
to the transmitter.
• The microphone's sensitivity is too high.
• The distance between the transmitter and the
receiver exceeds the range of action.
• The limits of the range of action have been
reached.
• The light intensity is too weak in the baby's
room; the unit functions in night vision mode
and so uses the infrared LEDs as lighting
source.
• The transmitter is placed beside other
electric appliances.
• There must be a lot of partitions between the
receiver and the transmitter.
BABY MONITOR TOUCH SCREEN • Instructions for use
.
OFF
.
BB - BB
Solutions
• Increase the microphone's sensitivity by means
of the adjustment system.
• Verify the connection.
• Diminish the microphone's sensitivity by means
of the adjustment system so that the
transmitter is activated by the voice.
• Bring the receiver and the transmitter closer
together.
• Move the receiver closer to the camera.
• Increase the light in the baby's room.
• Remove the electric appliances or the
transmitter to remove the source of
interference.
• Move the transmitter and the receiver.