Velleman HQ-Power HQLE10010 Instrucciones De Uso página 6

5.4 DMX Mode
The DMX mode allows you to control the device with any universal DMX controller.

All DMX-controlled devices need a digital start address so that the correct device responds to the
signals. This digital start address is the channel number from which the device starts to "listen" to
the DMX controller. The same starting address can be used for a whole group of devices or an
individual address can be set for every device.

When all devices have the same address, all the units will "listen" to the control signal on one
particular channel. In other words: changing the settings of one channel will affect all devices
simultaneously. If you set individual addresses, each device will "listen" to a separate channel
number. Changing the settings of one channel will only affect the device in question.
5.5 DMX Channel Values
2-channel mode
channel from
1
000
000
2 037
074
111
3-1-channel mode
channel from
1
000
2
000
3
000
3-2-channel mode
channel from
1
000
2
000
000
005
3
081
151
221
6-channel mode
channel from
1
000
2
000
V. 02 – 10/11/2017
HQLE10010
to
255
036
073
110
255
to
255
255
255
to
255
255
004
080
150
220
255
to
255
255
function
full dimmer
0-100 %
colour
R
G
B
colour mixing
function
red dimmer
0-100 %
green dimmer
0-100 %
blue dimmer
0-100 %
function
full dimmer
0-100 %
strobe speed
slow > fast
colour
no function
colour choose
colour auto run, slow > fast
colour fade, slow > fast
sound activation
function
full dimmer
0-100 %
strobe speed
slow > fast
6 ©Velleman nv