nedis FSBS100AT Guia De Inicio Rapido página 6

Power supply (Image B)
1. Open the protective cap B 1 to expose the ports.
2. Plug the micro USB cable B 6 into the micro USB port of the
product B 2 .
3. Plug the other end of the micro USB cable B 6 into a USB power
adapter to charge the product.
The charging indicator LED B 4 lights up red when charging.
4
The charging indicator LED B 4 stops lighting up when charging
4
is complete.
Pair with Bluetooth
To pair the audio source to the product using Bluetooth, follow these
steps:
1. Press the power button A 1 to switch on the product.
The status indicator LED A 9 lights up and the product emits a
4
tone to indicate pairing mode is active.
2. Activate Bluetooth on your audio source and connect with the
product (FSBS100).
Connect with audio cable (Image B)
Audio cable is not included.
4
To pair the audio source to the product using an audio cable, follow
these steps:
1. Open the protective cap B 1 to expose the ports.
2. Press the power button B 3 to switch on the product.
3. Plug the audio cable B 7 into the audio port B 5 to connect the
product to your media device.
Button functions (Image C)
C 1
C 2
C 3
BS100AT_MAN_COMP_(19371 1422)_v04.indd 6
Phone button
Volume down / previous track
button
Volume up / next track button Press the button to increase the
Press to answer or finish a call.
Press the button to decrease the
volume.
Press and hold to skip to the previous
track.
volume.
Press and hold to skip to the next
track.
6
13-8-2019 15:15:3