GE HFW350 Manual Del Propietario E Instalación página 25

REVERSING THE DOOR SWING (Optional)
REPLACE THE DOOR HINGE
5
AND THE DOOR HINGE COVER
ON THE OPPOSITE SIDE
• Rotate the door hinge and replace it on the opposite
side with its screws.
• Rotate the door hinge cover and replace it on the
opposite side with its screws.
Hinge Cover
Hinge
REMOVE THE TERMINAL
6
HOLDER AND DISCONNECT THE
PIN CONNECTOR FROM WASHER
• Using your
fingers, pry the
terminal holder
from the washer
face.
• Disconnect the
pin connector.
Terminal Holder
Pin Connector
49-3000217 Rev 5
Installation Instructions
REMOVE LOCK ASSEMBLY AND
7
INSTALL ON OPPOSITE SIDE OF
WASHER
• Remove the 2 screws from the lock cover and
remove it from the washer face.
• Insert the provided lock bar into the lock mechanism
in the washer face. Remove the lock assembly by
removing its two screws, using the lock bar to lift it
up to unhook, tilting and pulling it out of the washer
face. Disconnect its pin connector by unsnapping its
locks.
Lock
Cover
Hook Window
Hook
Insert Lock Bar
Remove
Assembly
Pin Connector
25