dazz MARVEL Avengers Manual página 6

1
STEP
Put the back rest and seat together
Put the back rest and seat together as the
picture 1. Please pay attention to the red
marked place ( left and right sides) which
need aim at the bolts holes.
2
STEP
Lock the back rest and seat
Lock the 4 bolts on the left and right side
as the picture step by step.
(Please remove the bolts that are pre-mounted
on the backrest; two bolts are located on each
Picture 2
side of the backrest.Place the backrest on the
seat. Begin at the right side where the tilting
handle is located.Screw both bolts on the right
side half way in and then screw in the two bolts
on the left side. Now tighten the bolts on both
sides)
3
STEP
Install the recliner covers
Attach the lower snap button first. Lock the screw into the hole
on the recliner cover, and then attach the screw cover on it.
Picture 1
Model B
4
STEP
Install the mechanism
Use the bolts to lock the mechanism
and seat together, and make sure the
bolts are screwed in tight.
Install the handles and push them
to the bottom
Model A
4
STEP STEP
Install the mechanism Install the wheel
Use the bolts to lock the mechanism
and seat together, and make sure the
bolts are screwed in tight.
STEP
Aim at the top of gas spring and the hole of mechanism,
then put the chair body down.
Sit in the center of the chair,
with your back to the backrest.
Do not push the chair
aroundwhen a person
5 6
STEP STEP
Install the gas spring Put on the gas spring cover
8
Put the chair body on the gas spring
Usage & Safety Instructions
Do not sit at the front edge of Do not stand on the chair.
the chair.
Do not push down Do not place all your
on thebackrest when weight on
is sitting in it. a person is reclined. the backrest only.
7
Do not use the chair with more
than one person
Do not place your hand
orfingers near the
recline mechanics.
© M A R V E L