Ameriwood HOME 2595342COM Manual De Instrucciones página 14

STEP 6
3
Top edges of both
parts will be flush.
3
Hole(s) in
this surface.
End View
Position and insert locking bolts (9) of right front leg (K) into edge holes of right panel (B) as shown.
Be sure both parts are positioned as shown. Place the hammer block on top of leg in each of the 3
locking bolt locations and give a firm strike to lock together. The locking bolt (9) will snap into the
locking sleeve (8).
IMPORTANT NOTICE: Once locked together, parts cannot be seperated.
Note: A rubber mallet can be used in place of a hammer and hammer block.
ameriwoodhome.com
(x2)
K
Be sure your parts are
B
positioned as illustrated.
K
B
14
Hammer Block
3