Makita DCU603 Manual De Instrucciones página 16

2. Assemble the holding frames by tightening 12
bolts.
Fig.23
► 1. Bolt
3. Remove the cord cover located in the lower right
corner on the rear of the machine.
1
Fig.24
► 1. Cord cover
4. Place the holding frames on the base unit, and
then temporarily tighten 2 bolts at the rear of the
machine. Tighten the rest of 4 bolts securely, and then
tighten 2 bolts at the rear of the machine securely.
1
1
Fig.25
► 1. Bolt (front) 2. Bolt (rear)
5. Attach the cord cover.
1
Fig.26
► 1. Cord cover
16 ENGLISH
2