5.5
DRAINAGE
Self- evaporating system
The self-evaporating system uses the collected water to cool the
condenser coils for better efficient performance. It is no need to empty
the drainage tank in cooling operation except in heating operation, drying
operation and high humidity conditions. The condensate water evaporates
at the condenser and evacuated through the exhaust hose.
For continuous operation or unattended operating in drying and heating
operation, please connect the drain hose to the unit. Condensate water
can be automatically flow into a bucket or drain by gravity.
Switch
z
operating.
Remove the plug of the water
z
outlet opening, and keep it in
safe area.
Securely and properly connect
z
the drain hose and make sure it
is
not
obstruction.
Place the outlet of hose over a
z
drain or bucket and ensure that
water could freely flow out of the
unit.
Do not submerge the end of hose
z
into water; otherwise it can cause
"Air Lock" in the hose.
off
the
unit
kinked
and
before
Remove the rubber
sealing plug.
clear
of
63
Continuous drain hose
(Inner diameter=16mm)