Fig. 3
4. Slide the trigger gun holder into position (Fig. 4).
Fig. 4
Trigger gun
holder
5. Slide the spray wand protector into position (Fig. 5).
Fig. 5
Spray wand
protector
6. To connect the spray wand with the trigger gun, press
the wings of the spray wand into the slot of the trigger
gun, then twist counterclockwise until the 2 parts are
completely locked together (Fig. 6).
Fig. 6
Cord holder
7. Connect the high-pressure hose to the trigger gun. Twist
to secure the connection (Fig. 7).
Fig. 7
8. Connect the other end of high-pressure hose to the water
outlet on the washer and tighten securely (Fig. 8).
Fig. 8
8
Spray wand
Trigger gun
High pressure hose
High-pressure
Water outlet
hose
Trigger gun
Spray wand wings