Descargar Imprimir esta página

Pur Line CHE-630 Manual De Usuario página 15

Chimenea eléctrica con mando

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
Main switch
The main switch is located on the back of the unit.
NOTE: Before using the fireplace please make sure set the main switch to the position I.
Set the main switch to the position O to turn off the unit.
Control Panel
The control panel is located on the top right corner of the unit.
Power ON / OFF
Press the power button to turn on the unit. Press again to turn off the unit.
NOTE: There is a thermostat limiter inside the unit. When the inner temperature is too hot, the unit will
automatically turn off to avoid damage to the product or risk of fire.
CAUTION! WARNING: DO NOT unplug the unit when it is still "ON"
Flame
Press the flame button to rotate and set flame effect levels.
Button Press
1st Press
2nd Press
3rd Press
4th Press
5th Press
To lock the flame function, press and hold the flame button for 5 seconds when the flame is in L4 mode. The
log lights will flash 5 times to indicate the flame function is locked. Press the flame control button to rotate the
logs glow effect. The logs glow setting are as follows.
Button Press
1st Press
2nd Press
3rd Press
4th Press
5th Press
To unlock the flame function, press and hold the flame button for 5 seconds.
Heater
Press the heater control to turn on the heater.
Press and hold the heater control button for 5 seconds to enter temperature adjustment mode. Continue to
press the heater control button to cycle through the different heat settings (17°C-27°C / 62°F-82°F + ON).
Press and hold the power button for 5 seconds while the heater is on to switch between Fahrenheit and Celsius
degrees.
To lock the heating function, press and hold the heater control button for 10 seconds. The heater will stop
function but the logs effect keep glowing. Press and hold the heater control button for 10 seconds to unlock
the heating function.
Timer
Press the timer button to turn the timer on. The timer function can controls both the flame effect and heater.
Flame Level
Display Value
High
L4
Medium
L3
Low
L2
Flame off
L1
All OFF
None
Flame Level
Display Value
Flame off
L4
Flame off
L3
Flame off
L2
Flame off
L1
All OFF
None
EN
Fireplace Appearance
Highest flame, Highest logs glow
Medium flame, Medium logs glow
Low flame, Low logs glow
Flame off, Highest logs glow
All OFF
Fireplace Appearance
Highest logs glow
Medium logs glow
Low logs glow
Highest logs glow
All OFF
13

Publicidad

loading