26
HOW TO USE
EXTRA RINSE
This option will add an extra rinse to the selected cycle.
Use this option to help ensure the removal of detergent
or bleach residue from fabrics. Liquid fabric softener, if
used, is always dispensed in the final rinse.
NOTE: You cannot select the Extra Rinse option with
the Spin Only option and Tub Clean cycle.
WATER PLUS
Use this option to add extra water to the wash cycle for
better wash performance and stain treatment of large or
bulky items.
NOTE:
y If the washing machine reaches its maximum water
level, the WATER PLUS button will have no effect.
y The Water Plus option can only be selected or
deselected while the cycle is running.
y Once the Water Plus option has been added to a
cycle, it is saved as a default option on that cycle
until you deselect it.
y To deselect the option, press WATER PLUS after
starting the cycle.
Adding the Water Plus Option to a Cycle
1. While the cycle is running, press START/PAUSE to
pause the cycle
2. Press WATER PLUS to add Water Plus as a default
option for that cycle.
3. Press START/PAUSE to resume the cycle.
SIGNAL
The washing machine plays a melody when the wash
cycle has finished. The volume of the melody is adjust-
ed using the Signal button.
Press and hold the Extra Rinse button for 3 seconds
to adjust the volume of the signal. Press and hold the
button repeatedly to adjust the volume of the melody.
When no signal is heard, the signal is off. The volume
settings are LOW – HIGH – OFF. The signal volume
can be adjusted at any time as long as the washer is
turned ON.
Control Lock
Use this option to disable the controls. This feature can
prevent children from changing cycles or operating the
machine. Once the Control Lock is set, it must be deac-
tivated before any controls, except the power button,
can be used. Once the washer has shut off, the power
button will allow the machine to be turned ON, but
the controls will still be locked. When the controls are
locked, CL will display alternately with the estimated
time remaining.
Press and hold the Signal button for 3 seconds to acti-
vate or deactivate Child Lock.
NOTE: Once the controls are locked, they must be
manually unlocked to restore operation.
ADD GARMENT
Laundry may ONLY be added to the load at the prop-
er time in the wash cycle. When the Add Garment
light is illuminated, it is safe to pause the cycle and
add more items to the load. If garments are added
when the Add Garment light is off, the washer will
not adjust for these items which could result in poor
performance and/or fabric damage.
1. Press the START/PAUSE button to pause the
washer.
2. Open the lid after it unlocks.
3. Add your additional items.
4. Close the lid.
5. Press the START/PAUSE button. The cycle will
resume after the lid locks.