Publicidad
PRODUCT SETUP
WeB-BAseD setuP
In order to use all of the functions of this router, you must register it with mydlink. simply
follow the steps at the end of the setup Wizard during installation to register your product with your
mydlink account.
NOTE: after mydlink registration is completed, your router's default pppoe, l2tp, pptp connection
will be set to always on. If your Isp charges for usage, you may wish to manually choose dial on
demand as your default setting.
Router
Router
4
3
lan
WELCOME TO THE D-LINK SETUP WIZARD
Dir-816l
DIR-816L_A1_QIG_v1.00(DI).indd 3
Step 1
position your dIR-816l near your Internet-connected modem and
pc. keep the router in an open area for better wireless coverage.
PC
Modem
Step 2
unplug the modem ethernet cable connected to your computer and
Modem
plug it into the port labeled 'InteRnet' on the router.
connect the supplied power adapter to the router and a power
outlet, then verify that the power led is on.
2
1
InteRnet
RESET
Step 3
PC
plug one end of the supplied ethernet cable into the port labeled '1'
Modem
on the back of the router, and the other end into the ethernet port on
your computer.
to set up the dIR-816l through Wi-Fi, go to your computer or mobile
Router
device's Wi-Fi settings and select the network (ex: dlink-A8FA). enter
Wi-Fi password (ex: akbdj19368) on the included Wi-Fi configuration
note.
4
3
lan
2
1
InteRnet
RESET
Step 4
open a browser on the connected computer. If you are not
automatically directed to the d-link setup Wizard, go to
'http://dlinkrouter.local.' and follow the onscreen instructions to
configure your dIR-816l. use 'Admin' as your username and leave
the password blank to configure manually.
3
2013/8/13 上午 10:38:17
Publicidad
