Lenco BT-130 Manual De Usuario página 10

OTS80 BK3254 BT_AUX_20170919_r0_draft for MK
3. Press the " /
4. Now you have hand free function with the Bluetooth speaker.
5. Press the " /
And the paused music will resume playing automatically.
6. Press and hold the " /
incoming call.
Tip: speak to the "MIC (2)" hole direct with distance in 30 ~ 60cm to get
the best speakerphone performance when necessary.
J. Redial For Last Call Function
1. To redial for last called number by the Bluetooth Speaker, even it is in
music playing mode.
2. Press twice the " /
playing will pause and switch to hand free function for redial.
3. Press the " /
4. Make sure that your mobile phone has have last dial call used, if not,
the redial for last call function cannot be activated.
K. AUX IN Function
1. In power ON mode, connect the Bluetooth Speaker's "AUX IN Jack (11)"
with an external device's "Earphone/AUX/LINE" Output through the
Audio Cable (Provided).
2. The Bluetooth Speaker will switch to "AUX In" mode automatically
from Bluetooth mode, and the "MODE Indicator (1)" will switch to
long light red
3. Now the AUX In function is ready, start to music play from your
external device by it control and or program, for example, Play, Stop,
volume control...etc.
4. You also can use Bluetooth Speaker control;
5. Press and hold the "
6. Press and hold the "
7. When maximum or minimum volume is reached, a beep sound will
heard.
(6)" button to pick up the call if you want.
(6)" button again to hang up the call when finished.
(6)" button for 3 seconds to ignore the
(6)" button to enter into redial function, the
(6)" button again to hang up the redial call.
from blinking.
(7)" button to increase the volume level.
(5)" button to decrease the volume level.
10