Publicidad
Idiomas disponibles
Idiomas disponibles
5. Insert the door (C) to right front leg and attach
door knob to the door using M4 screw and washer.
Attach hose of regulator tightly to the bracket.
6.
Place propane gas tank (not included) into the
7.
metal stand. Make sure the gas tank sits on the
metal stand completely. Turn the preassembled
wing screw on the outer part of metal stand
clockwise to secure the propane gas tank tightly.
8. Turn the cylinder valve on the tank
clockwise to close the propane tank.
Attach the preassembled regulator
from the table top (B) to the cylinder valve
by turning the regulator coupling nut
clockwise. Make sure it is fastened
securely and tighten connections by hand
only.
Door Knob 1pc
M4 x 8 Screw 1pc
CYLINDER VALVE
BLACK COUPLING NUT
turn clockwise to connect
REGULATOR
1-866-771-2663 | Page 7
Washer 1pc
C
PRESSURE
RELIEF VALVE
BLEED-OFF
VALVE
turn clockwise
to reseal
Publicidad
